CME Control 5 digital remote control Manual de usuario descargar pdf (Pagina 26)

9.4 Pedal A Type

z If you change pedal A type from switch to continuous or vice versa, please set the

proper pedal type.

z Operation：【SHIFT】ÖE2

【Pedal Polarity】Ö【Set value】Ö【ENTER】

z Default value：1(switch)

z Value range：1-2

9.5 Pedal B Polarity

z You can set the pedal B polarity to make it work properly.

z Operation：【SHIFT】ÖF2

【Pedal Polarity】Ö【Set value】Ö【ENTER】

z Default value：1

z Value range：1-2

9.6 Pedal B Type

z If you change pedal B type from switch to continuous or vice versa, please set the

proper pedal type.

z Operation：【SHIFT】ÖF#2

【Pedal Polarity】Ö【Set value】Ö【ENTER】

z Default value：2(continuous)

z Value range：1-2

9.7 Local On/Off

z The local control decides if the MIDI data will be sent to the expansion board.

z Please refer to the appendix <MIDI route>.

z Operation：【SHIFT】ÖG2

【Local On/Off】Ö【Set value】Ö【ENTER】

z Default value：On

z Value range：On, Off

9.8 Data Dump

z Use this function to dump the instrument settings by system exclusive messages, so

you can quickly save and restore the settings.

z Operation：【SHIFT】ÖG#2

【Dump】Ö【ENTER】

z MIDI message sent：F0 00 20 63………F7

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 48 49

Sin comentarios

CME Control 5 digital remote control Manual de usuario Pagina 26