CME U-CTRL Manual de usuario

UF v2 Intelligent Keyborad Controller User’s manual ————————————————— Model: UF 50/60/70/80 Read “Precautions” on page 5 before use (v.1.1) Pl

10 1 General view 1.1 Front panel The keyaboard There are four models for the UF v2 series, including UF 50(49 keys), UF 60(61 keys), UF 70(76 k

11 The pitchbend wheel: It can change the pitch up and down, and when released it will automatically return to the center position. The modula

121.2 Rear panel z The expansion board slot: it is used for an expansion board, such as an firewire expansion board or an sound module expansion bo

13 2 Installation guide 2.1 Power supply 1. Make sure the power switch is set to OFF. 2. Connect the AC adaptor to the POWER IN port in the rear p

14 3 Connections Before you make these connections, please turn off all devices to avoid possible damage. Please refer to the fig. below to make

15 4 Basic operation The【SHIFT】button： z Press and hold the【SHIFT】button then press the【OCTAVE/TRANSPOSE】 button for the transpose function. z Pr

16 Use this button to swich to the function layers for knobs, faders and buttons. There are three layers for knobs, faders and buttons, and you can s

17 5 Turning on 5.1 Normally turning on  Set the power switch on the rear panel to ON to turn on this product. 5.2 Driver installation  After

18 6 Basic functions 6.1 Quickly selecting a voice z Rotate the data dial to find the voice# them press the【ENTER】button the send the MIDI data, o

194 60 61 62 63 64 65 66 67 68 69 70 715 72 73 74 75 76 77 78 79 80 81 82 836 84 85 86 87 88 89 90 91 92 93 94 957 96 97 98 99 100 101 102 103 104

2Thank you for choosing CME UF v2 — Intelligent Keyborad Controller Please keep all the important information here Attach your invoice or receipt her

20message, the data range is 0-127(continuous data). z To change pedal type or polarity, please use the system settings function (9.3-9.6). Yo

216.10.3 Program Change z Operation：【SHIFT】ÖD1【Program Change】Ö【Set value】Ö【ENTER】 z MIDI message sent：CC#0 + CC#32 + Program z Default value：1 z

22 7 Advanced functions 7.1 Dual mode z When the dual mode is enabled, all the notes played will be sent to two MIDI channels, so the sound will be

237.4 Temperament z You can change the temperament other than the defult equal one. z Operation：【SHIFT】ÖA1【Temperament】Ö【Set value】Ö【ENTER】 z Defaul

24 8 ASSIGNING 8.1 Assigning Controllers z You can use the ASSIGN function to re-define a control parts by data type and MIDI channel. z Operation：

25 9 SYSTEM settings 9.1 Keyboard V.Curve z You can try different velocity curves to find your favorite one and get the best touch response for the

26z Operation：【SHIFT】ÖD#2【Pedal Polarity】Ö【Set value】Ö【ENTER】 z Default value：1 z Value range：1-2 9.4 Pedal A Type z If you change pedal A type from

27 10 DISPLAY z You can choose the contents to display, so you will see the information you want. 10.1 Program display z To display the voice#:

28 11 WIDI (wireless MIDI) z This product has a built-in bi-directional wireless MIDI system (WIDI-EK), and this WIDI-EK work as a wireless MIDI in

29 Up to 32 pairs of WIDI devices can be use at the same place. When many pairs of the WIDI devices are used at the same place, please keep the ch

3Special Message Section This product utilizes batteries or an external power supply (adapter). Do NOT connect this product to any power supply or a

30 12 U-CTRL mode Notes for the U-CTRL mode： z You can control popular computer software in the U-CTRL mode. In this mode, knobs, faders and buttons

31 13 Registration BANK access z You can save all the instrument settings to the registration BANK. z There are about 10 registration BANKs in t

32 16 Appendix 16.1 Initial status Status Contral part Panel text Function all layers Pitch wheel PITCHBEND Pitchbend all layers Modulation hlMOD

33Layer A (indicator A on) Knob 1 KN1 CC#10-PAN,CH1 Layer A (indicator A on) Knob 2 KN2 CC#10-PAN,CH2 Layer A (indicator A on) Knob 3 KN3 CC#10

3416.2 Assignable controllers list Controller# Name 000 Bank Select 001 Modulation wheel 002 Breath control 003 Undefined 004 Foot controller 005

35042 Pan 043 Expression 044 Effect control 1 045 Effect control 2 046 Undefined 047 Undefined 048 General Purpose #1 049 General Purpose #2 050

36088 Undefined 089 Undefined 090 Undefined 091 Reverb Send Level 092 Tremolo Depth 093 Chorus Send Level 094 Celeste/Detune Depth 095 Phaser Depth 0

37133 * Vibrato Delay 134 * Low Pass Filter Cutoff Frequency 135 * Low Pass Filter Resonance 136 * High Pass Filter Cutoff Frequency 137 * EQ Low

3816.3 GM voice list Voice# Name Voice# Name Voice# Name Voice# Name 001 GrandPno 033 Aco.Bass 065 SprnoSax 097 Rain 002 BritePno 034 FngrBas

39 16.4 Scale list Pitch name C C# D D# E F F# G G# A A# BScale No. Note number: 1 2 3 4 5 6 7 8 9 10 11 12001 Major Scale CCDDEFFGG A A B00

4FCC INFORMATION (U.S.A) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in th

40

41

42

43

4416.5 Note list Note # Name Note # Name Note # Name Note # Name 000 C-2 032 G#0 064 E3 096 C6 001 C#-2 033 A0 065 F3 097

45 16.6 Temperament list No. Type C C# D D# E F F# G G# A A# B 0 EQUAL △ △ △ △ △ △ △ △ △ △ △ △1 ARABIC △ △ △ △ ▲ △ △ △ △ △ △ ▲2 ARABIC △

46 16.7 Velocity curve list Normal Soft 1 Soft 2 Hard 1 Hard 2 Expand Compress Fixup 1 Fixup 2 Fixup 3

47 16.8 After touch curve list Off Normal Soft 1 None Soft 2 Hard 1 Hard 2 Expand Compress

48 16.9 MIDI route MIDI route in the normal mode MIDI route in the U-CTRL mode

49 17 Troubleshooting Trouble with possible reasons and solution z After turning on the power switch, the instrument is not powered on: 1. Make

5 PRECAUTIONS IMPORTANT Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical sh

5018 Specifications z Keyboard  UF50：49 keys(C1 - C5), (velocity sensitive and aftertouch)  UF60：61 keys(C1 - C6), (velocity sensitive and afterto

51 Manual switching for one-to-multi communication (auto finding and selecting).  Compatible with WIDI series product such as WIDI-XU  Low

52 19 MIDI Implementation Chart CME UF v2(MIDI KEYBOARD) Model: UF v2 MIDI Implementation chart Ver: 1.0 Function Transmitted Reco

2007-11 (v.1.1) Central Music Co. Tel: +86-10-8580 1115 Fax: +86-10-8580 1114 Web: www.cme-pro.com E-mail for support: supp

6systems are not normally affected by radio transmissions. The manufacturer of such equipment can advise if it is adequately shielded from radio tran

7Make sure the computer USB port has adequate power supply, otherwise the product does not work properly. WARNING: z Do not expose the instrument

8 Content 1 General view .........1

910.5 Controller display.........................27 11 WIDI (wireless MID